What Is The Right Tire Pressure For Your Bike?
Before riding your bike to go on a cycling adventure, it is important to make sure that your equipment and gears are all in great shape. An essential step in your preparation is to make sure that you have the correct air pressure inside your tires. This can make your ride smoother and also prevent accidents and injuries.
Correct Tire Pressure Improves Your Ride
A lot of people do not really know what the correct tire pressure should be. Actually, the answers differ depending on what kind of bike you are riding, what terrain you will be cycling, and what tires you have.
Air pressure is measured in psi or pounds per square inch. Bicycle tire manufacturers print their recommended pressure on the sidewall of the tires to guide the riders. Make sure you take a look at this and follow what they recommend when you are pumping air in your tires.
However, merely looking at your tire’s sidewalls and pumping in whatever is printed there is not the only thing that you should be doing to get the correct tire pressure.
Check out the rest of this article to find out what else you should be doing and considering to calculate the correct tire pressure is for your bike and ride.
Narrow bike tires usually need more pressure than wider ones. Here are the usual recommendations for the most common bike tires:
80 – 130 psi
30 – 50 psi
50 – 70 psi
If you noticed, manufacturers do not directly tell you what the right air pressure for your tire is. Instead, they give a range. This is because you need to factor in your body weight, too.
Th rule of thumb is this: The heavier you are, the higher your pressure must be. For example, if you are a 130-pound rider on a road bike, your air pressure should be around 80-100 psi. But if you weigh 200 lbs, you should pump in higher air pressure of 120-130 psi.
Just make sure not to go below or above the manufacturer’s recommended tire pressure for each type of tire.
If you are planning to carry something that could add a significant weight to what the bike is already carrying, consider this, too. The rule of thumb remains the same. The heavier the load, the higher your pressure must be.
The air pressure for you front and rear tires are not the same. The front tire carries less weight and pressure compared to the rear tire. Hence, the front tire should have lower pressure than the rear tires. Make sure you also consider this before pumping in air.
This is the final consideration you must have before finally pumping in air. Before you go on a cycling trip, determine what the terrain of your route is.
If you are planning to go off-road and a cycle on a terrain that is a bit rocky, go low. Low pressure will make your tires softer, and softer tires run smoother in rocky terrains.
Just remember not to go too low. If you do not have enough pressure on your tires, they might pick up a lot of debris that might cause problems as you go along your ride. Hence, you have a higher risk for getting a flat tire or deforming your rim. Having these repaired can be a bot expensive, so make sure you get your air pressure right.
No concrete road is perfectly smooth. So, it is not advisable to put in the maximum pressure that your tires can allow. Concrete roads still have multiple tiny bumps that your ride will have to pass through. If you put in too much air pressure in your tires, you might suffer through a bumpy ride on a concrete road. So, it would make sense to give a little space in your tires so you can glide through the concrete smoothly.
Monitoring and Pumping
It is also good practice to monitor the air pressure in your tires before your ride. Just because you have made the necessary adjustments during your previous ride does not mean that you don’t need to do it anymore. Monitoring air pressure is very important, as it helps prevent any unwanted disasters that might be caused by poorly inflated tires.
When you have finished taking all the things mentioned earlier into consideration and have determined the right air pressure for your bike tires, make sure that you also follow the proper way of inflating them and by using the right pumps for your bikes.
Some pumps are equipped with technology that will immediately tell you how much air pressure you have your tires. These pumps are easier to use, since you no longer have to guess. But, you must not forget to manually check the hardness or softness of the tires with your hands. This will help you tell if you already pumped in enough air and make you feel more confident during your ride.
If you don’t feel very confident in doing all of these on your own, do not hesitate to call or visit experts who can help you. They might charge you a little for their services, but you can consider that cost as cost for a safety precaution.
A lot of accidents caused by bikes have already been recorded across the United States. Make sure you do not contribute to increasing this number by making sure that all your gears and equipment are in check.
More pumps with better technology are still being studied right now, and more things that can aid bikers to be safe are being crafted.
Sure enough, bikers for leisure and sports can rejoice and look forward to a safer ride along smooth roads and off-roads in the future. But for now, remember all these things about the correct tire pressure for your bike and apply them to avoid accidents and irreversible damages to your bike, yourself, and others.